Wall2Floor Top Coat Waterproof

Two-component spreadable coating for humid environments

Wall2Floor Top Coat Waterproof is a two-component epoxy coating in paste form, for interior use, trowelable, for horizontal and vertical applications, particularly suitable for humid environments or those repeatedly in contact with water. Thanks to its special formulation, it provides a seamless, continuous surface with high resistance to wear. If there are scratches in the paint, when colour changes are noticeable the product does not absorb and show any water passages.

Wall2Floor Uses

Wall2Floor can be applied on:

Concrete
Screeds (sand and cement-based screeds, sand and specific binder for screeds, ready-made packaged screeds, self-leveling sand and cement screeds)
Radiant and refreshing screeds with minimum thickness, above pipe, between 30-40 mm
Surfaces covered with ceramic, porcelain and mosaic tiling
Klinker
Surfaces with existing epoxy or polyurethane coatings
Surfaces in natural and rebuilt stone
Mineral conglomerates of various kinds, provided they are absorbent
New and old plasters based on hydraulic binders
Organic or mineral decorative coatings

Wall2Floor Unsuitable Substrates

The Wall2Floor system cannot be applied to forkliftable surfaces, horizontal or vertical substrates that do not offer the necessary guarantees in terms of bonding and dimensional stability.

Forkliftable surfaces (garages, loading-unloading areas where the use of trolleys, transpallets, forklifts or similar, cars, etc.)
Radiant screeds with heating and cooling system
Wooden flooring
Linoleum
Pre-finished wooden flooring
Painted and unpainted uperfici metal surfaces
Glass surfaces or concrete and glass blocks
Moist surfaces or surfaces with rising damp
Do not apply to bathroom fittings or other substrates where water may be collected
In case of radiant screeds with electric heating system, Calcium sulphate CA or magnesite MA, other types, please contact our technical assistance service.

Application:

Mixing ratio by weight: 20 Kg Wall2Floor Top Coat Waterproof A + 1.2 Kg Wall2Floor Top Coat Waterproof B.
Dilution: do not dilute
Tinting: stir Wall2Floor Top Coat Waterproof A before colouring. Tint using Novacolor tinting system. Mix the colouring agent with Wall2Floor Top Coat Waterproof A using a gyroscopic stirrer or a mechanical spiral stirrer.
Preparing the mix: only immediately before applying the product at the job site add to each 20 kg package of Wall2Floor Top Coat Waterproof A, a 1.2 kg package of Wall2Floor Top Coat Waterproof B. The component B must be added gradually and blended using a mechanical spiral stirrer. The mixing of the two components cannot be performed manually.
Mixing time: about three minutes. The mix obtained must be a uniform, thixotropic mortar, free of lumps.
Pot life of mix: approx. 60 minutes
Application equipment: stainless steel trowel.
Application: apply a first coat of Wall2Floor Top Coat Waterproof A, previously mixed with Wall2Floor Top Coat Waterproof B to smooth the surface. Wait for the surface to dry, usually between 3-4 hours, and then apply a second layer of Wall2Floor Top Coat Waterproof, previously mixed with Wall2Floor Top Coat waterproof B, and work the surface to obtain the desired aesthetic effect.
No. of coats: 2
Coverage rate (referred to the mix Wall2Floor Top Coat Waterproof A+B): 0.8-1.2 kg/m², in two layers
Drying time: 3-4 hours for the first layer; over painting after 12-14 hours.

May also be applied over:

High-quality interior decoration in line with today’s “concrete-like” finishing preferences.

Approximate coverage yields 0.8-1.1 kg/m², in two coats, depending on the type of work and the condition of the background surface. We recommend checking actual yield by making a preliminary test on the specific background.