Epoxy coating for finishes, on walls and technical surfaces, for indoors
Metallo_Fuso Base Coat is a decorative coating for indoor walls and technical surfaces composed of selected aggregates, twocomponent epoxy resin compounds, fillers and special rheological additives to give the product optimum workability.
Metallo_Fuso Base Coat A can be coloured using the Novacolor tinting system.
Application of Metallo_Fuso Base Coat allows you to create a smooth or textured finish and is further enriched when combined with Metallo_Fuso. The surfaces become worthy decor that evokes the flexibility and formability of metals.
Application:
- The surface must be dry, dust-free and free of salt stains caused by humidity.
- If necessary, restructure or consolidate the substrate with specific products.
- If mildew is present, treat the surface with specific products.
- Remove by brushing, or washing, any efflorescence present and old, flaked paint.
- Completely eliminate any layers of raised lime-wash or tempera paint. Remove dust, smog or other deposits, by brushing.
- In the presence of broken and flaking substrates, apply a coat of Decofix (micronised wall fixative) with a brush. For consistent, intact substrates, you can alternatively apply a coat of diluted Novaprimer (water-based pigmented acrylic fixative, with a brush.
- In the presence of particularly absorbent or critical substrates, you can apply, using a brush or roller, a coat of Fondo Universale (base coat primer).
- On completely dry surfaces, apply a coat of Metallo_Fuso Base Coat using a stainless steel spatula.
- Drying time: approx. 24 hours based on the type of support, its absorption and the environmental conditions.
May also be applied over:
- New and old plaster with a hydraulic binder base.
- Old gypsum and plaster
- Plasterboard surfaces
- Concrete surfaces
- Old synthetic or mineral paint
- Conglomerates varying in mineral nature, provided they are absorbent
- Surfaces in wood, chipboard, plywood or MDF and similar
- PVC substrates
- Fibre cement substrates
Approximate coverage yields 2.0-5.0 m2/l per single coat and refer to the applications on smooth and average absorbing substrates. It is advisable to determine the real yield with a preliminary test on the specific substrate.
