Marmur Fine

Lime-based trowel coating with marble powder for interiors and exteriors

Marmur Fine is a lime-based finishing plaster coat, made of wellseasoned hydrated putty, fine marbles and rheological modifiers, which guarantee a perfect workability of the product.

With its formulation, Marmur Fine permits to achieve “cloudy” esthetic effects, with soft and vibrant shades.

Thanks to its versatility, Marmur Fine permits to get several textures, depending on the application techniques.

Marmur Fine is indicated for the decoration of prestigious exterior and interior surfaces. Natural lime plasters represent Marmur Fine’s most suitable substrate, since the product reacts chemically with them, building up a unique “body” able to preserve the lime coating for a longer period of time.

Application:

The substrate must be perfectly dry, dust-free, with no humidity and salt stains. Resurface or consolidate the surface with specific products if necessary.
In case of mold, treat the surface with suitable specific products.
Brush or remove any efflorescence and old peeling paint. Higher layers of old lime-based paint and tempera paint must be removed.
Brush out dust, smog or other deposits before the application.
In case of non-homogeneous or chalky surfaces, apply one layer of Decofix (micronized wall sealer) diluted, with a brush.
Over dry and compact substrates, apply one layer of Acricolor (water-based acrylic pigmented primer) or of Novaprimer (waterbased acrylic pigmented primer), diluted, with a brush.
On dry surface, apply one smooth coat of Marmur Fine with a stainless steel trowel. Before it dries out, work the surface with a wet sponge trowel. Remove any imperfections and over-product.
Wait the complete drying of the surface, then apply a second coat of Marmur Fine with stainless steel trowel and, before it completely dries, finish off the surface with a wet sponge trowel, obtaining a compact and rough surface at the same time.
In order to obtain a semi-polished and compact effect, work the surface still wet with a stainless steel trowel.
To improve the visual and tactile effect, it is recommended to keep the surface wet, compacting it until obtaining the desired effect.
Different textures can be reach using specific tools and/or applying, after at least 24 hours, one or more coats of Antiche Patine, siloxane color wash, properly diluted.