Decorative coating with rust effect, for interiors and exteriors
IRONic is a water-based system consisting of a base coat (IRONic Fondo) and an oxidative finish (IRONic Liquido Antichizzante).
The application of IRONic Liquido Antichizzante on IRONic Fondo produces an oxidative effect exactly alike the effect of an iron surface exposed to atmospheric agents’ natural corrosion. The surfaces decorated with IRONic are dynamic and the aesthetic can change over time.
IRONic draws the line between tradition and innovation. With its decorative system based on polymers it is possible to achieve different oxidation effects, taking into account the clients requests.
Application:
- On dry and previously treated substrate, apply a layer of diluted IRONic Fondo.
- After at least 4 hours apply another layer of diluted IRONic Fondo.
- After at least 12 hours, apply one coat of IRONic Liquido Antichizzante, using the respective tools.
- In order to increase the oxidation, process a further layer of IRONic Liquido Antichizzante every 2 hours would be recommended.
- After 2 hours at least apply one layer of IRONic Liquido Antichizzante, dabbing the surface with a marine sponge.
- In order to increase the oxidation, process a further third layer of IRONic Liquido Antichizzante would be recommended.
- Before continuing with the surface protection, it is advisable to wait at least 48 hours from the last oxidation phase, accordingly to the kind of substrate, its absorption and environmental conditions.
- The application of Decofix and of 2Screen slightly modifies the aesthetic aspect of the surface. It is recommended to make a trial test to evaluate the aesthetic effect.
- The protection offers a reduction on chalking walls and a good water resistance.
- The aesthetic effect, even if protected, can change along the time.
- The ideal performance is reached 5 days after the protection application.
May also be applied over:
- Mortars
- Pre-mixed, new fine plasters
- Pre-existing lime plasters
- Gypsum boards
- Pre-existing synthetic and mineral paints
- Various absorbent mineral conglomerates.
- Various chipboard, plywood, MDF, wood surfaces.
- Polyvinyl chloride substrates
- Zinc plated steel substrates
- Iron substrates
- Fibrocement
Approximate coverage yield:
IRONic Fondo (oxidation effect): 5-8 m2/l in two layers, depending on the type of substrate and absorption.
IRONic Fondo (corrosion effect): 3-6 m2/l in two layers, depending on the type of substrate and absorption.
IRONic Liquido Antichizzante: 8-12 m2/l in two layers, depending on the type of substrate, its absorption and the desired effect.
It is always advisable to carry out preliminary tests at site in order to determine the right yield of the system. Depending therefore on the nature of this product and the different effects achievable, yields have to be considered purely indicative
