Water-based polyethylene wax for mineral finishes
Cera Wax is a decorative interior wax in an aqueous dispersion, formulated for treating mineral decorative finishes in indoor environments. Available in three subtly pearlescent shades (Gold, Silver, and Bronze) as well as in the neutral PLUS version, Cera Wax gives surfaces light water repellency, enhancing the visual appearance of the applied decorative finish.
Cera Wax is easy to apply, quick-drying, and suitable for both manual and mechanical polishing.
Application:
- The surface must be dry and free of dust and salt stains from moisture.
- Wait at least 8 hours to make fine trowel finishes and at least 24 hours for multilayer decorations with a dry film thickness of more than 2 mm.
- On surfaces treated with the interior decorative products from the Minerals range, apply a coat of Cera Wax with a microfibre cloth or glove, working the surface with circular movements.
- Wait a few minutes and wipe the surface with a clean glove or cloth, removing any material build-ups.
- Cera Wax can also be applied with a sponge-pad, taking care to avoid excess and build-up. We recommend always using a cloth to wipe the surface while still fresh to remove excess wax.
- For greater protection, or a more uniform appearance, a second coat of Cera Wax PLUS can be applied after at least 2 hours, following the procedure described above. Wait a few minutes and wipe the surface with a glove or microfibre cloth without product, removing any build-up of material.
May also be applied over:
- Mineral-based decorative finishes for interiors;
- Non-mineral decorative finishes with a porous and absorbent surface for
interior environments; - Application on particularly matte surfaces may alter their visual appearance and
gloss level.
Approximate coverage yields 7-20 m2/l, per single layer, depending on the type of substrate and its absorption. We recommend checking actual yield by making a preliminary test on the specific background.
