Fase silossanica for velatura on synthetic and siloxane surfaces
Fase Silossanica is a transparent vehicle made of acrylic and styrene copolymers, siloxane resins and special additives. The particular formulation of Fase Silossanica allows the application on multiple supports, such as synthetic, mineral and siloxane surfaces for interior and exterior velaturas. It allows to achieve vibrant transparent chromatic effects, with the possibility to obtain different nuances and shades depending on the colours and on the application technique.
Application:
- The substrate must be perfectly dry, dust-free, with no humidity and salt stains.
- Resurface or consolidate the surface with specific products if necessary.
- In case of mould, treat the surface with suitable specific products. Brush or remove any efflorescence and old peeling paint. Higher layers of old lime-based paint and tempera paint must be removed.
- Brush out dust, smog or other deposits before the application.
- In case of non-homogeneous or chalky surfaces, apply one layer of Decofix (micronized wall sealer) diluted, with a brush.
- Over dry and compact substrates, apply one layer of Acricolor (water-based acrylic pigmented primer) or Novaprimer (waterbased acrylic pigmented primer), diluted, with a brush.
- Once the substrate is completely dry, apply one layer of Fase Silossanica with a brush, a sponge or a glove, working the surface depending on the desired effect.
- To enhance the aesthetic effect or for on-site requirements, it is possible to apply a second layer of Fase Silossanica, following the above-mentioned procedure.
- Drying time: 24 hours approx. depending on the kind of substrate, absorption rate and environmental conditions.
- It is possible to apply Fase Silossanica on mineral surfaces such as plasters, stuccos, paints, once the surfaces are completely dry.
- Follow carefully the application procedure previously described, paying attention to the different absorption rate and roughness of the surface, that might change the final perception of the color
May also be applied over:
- Decoration of classical and modern interiors.
- Special finishing coat for exterior facades in historical town and country areas, in respect of the historical heritage.
- Finishing coat for synthetic facades, where highly prestigious aesthetic effects are required.
Approximate coverage yields 12-15 m2/l, depending on the kind of substrate and its absorption rate. It is advisable to determine the real yield with a preliminary test on the specific substrate.
