Decorative coating with green copper oxidation effect
Verderame_Wall Painting is a water-based system consisting of a base coat (Verderame_Wall Painting Fondo) and an oxidative finish (Verderame_Wall Painting Liquido Antichizzante).
The application of Verderame_Wall Painting Liquido Antichizzante on Verderame_Wall Painting Fondo produces an oxidative effect exactly alike the effect of a green copper surface exposed to atmospheric agents’ natural corrosion.
Verderame_Wall Painting can be used both in interiors and exteriors. If used for the decoration of interior surfaces it is possible to modify the colour of Verderame_Wall Painting creating and customizing oxidation aesthetic effects.
With its decorative system based on polymers it is possible to achieve different oxidation effects, taking into account the clients requests
Application:
- The substrate must be perfectly dry, dust-free, with no humidity and salt stains.
- If required, continue with the preparation operations, according to the nature of the substrate, using specific products.
- In case of mould, treat the surface with suitable specific anti-mould products.
- Brush or remove any efflorescence and any old peeling paint. Higher layers of old lime-based paint and tempera paint must be removed washing them out with a pressure washer or wetting the surface and scraping the layers properly.
- Brush out dust, smog or other deposits before the application.
- Send and clean the surface and continue:
May also be applied over:
- Mortars
- Pre-mixed, new fine plasters
- Pre-existing lime plasters
- Gypsum boards
- Pre-existing synthetic and mineral paints
- Mineral mixes if absorbent
- Wood porous substrates, such as MDF, or clipboard or plywood.
- Polyvinyl chloride substrates
- Zinc plated steel substrates
- Iron substrates
- Fibrocement
Approximate coverage yield:
Verderame_Wall Painting: 8-12 m2/l in two layers, depending on the type of substrate and absorption.
Verderame_Wall Painting Liquido Antichizzante: 10-14 m2/l in two layers, depending on the type of substrate and absorption.
It is always advisable to carry out preliminary tests at site in order to determine the right yield of the system. Depending therefore on the nature of this product and the different effects achievable, yields have to be considered purely indicative.
